Environmental Impact Assessments

Environmental Impact Assessments (EIAs) are an important aspect of any geothermal project, from the earliest planning stages through to post-project analysis.

Measuring natural CO2 emissions in the Reykjanes geothermal area. An EIA of a geothermal project involves comparison with alternative energy sources that may include fossil fuels, hydropower, nuclear power, renewable energy sources (solar, wind, tide etc.), or no project.

The chief environmental concerns in geothermal utilization are:

  • Surface disturbances
  • Physical effects - fluid withdrawal
  • Noise
  • Thermal pollution
  • Chemical pollution
  • Protection

Iceland GeoSurvey offers complete EIA services at every juncture of the process.

Monitoring environmental changes

Monitoring changes in geothermal manifestations in unexploited areas to establish whether changes that occur after the start of production are due to exploitation or to be expected from natural causes. Such studies include mapping, establishment of base concentrations and monitoring of chemical composition of fluids, monitoring surface temperature changes, e.g. by remote sensing.

Gravity and leveling surveys before utilization

To obtain a background value prior to exploitation followed by monitoring changes due to subsidence caused by mass removal from the geothermal reservoir.

Groundwater studies

To establish whether direct discharge of geothermal effluent into the ground is feasible. If this course of action is followed the groundwater in the area needs to be monitored with respect to temperature and chemical composition with an eye to possible changes in flora and fauna.

Re-injection studies

Involve thermodynamic calculations and experimental work concerning the danger of deposition if reinjection is the chosen option for the discharge of geothermal effluent. Modeling of reservoir properties that establish the optimum distance of reinjection wells from the production area will be necessary. If they are too close there is a danger of cooling down the fluid in the producing reservoir but if they are too far their role in recharge may become minimal.

Gas emission monitoring

Point measurements and monitoring of gases in the atmosphere involve establishing a base level for gases such as H2S, SO2 and Hg in the atmosphere followed by monitoring to find out whether recommended levels are being exceeded or not.


Steinunn Hauksdóttir
Deildarstjóri upplýsingatækni Jarðefnafræðingur

+354 528 1535
+354 822 1999
[email protected]